– Epson WF-C579, WF-C529R Troubleshooting, click here
– To know more about Installation on Epson WF-C579, WF-C529, click here
WF-C579, WF-C529 CR fatal error 1
Error name:
- CR PID driving time error (error code: 000020)
- CR load position driving time error (error code: 000030)
Cause:
- The driving time of the motor exceeded the set time
Suspected cause:
- Main Board Assy failure
Fix Epson WF-C579, WF-C529 error codes 000020, 000030?
– STEP 1: Check the connection state of the ADF/SCN cables
- Check the reproducibility
Did the corresponding error occur?- Yes? – Replace the Main Board Assy
- No? – Inquire at Epson Service Support department.
WF-C579, WF-C529 CR fatal error 2
Error name:
- CR PID excess speed error (error code: 000022)
- CR load position excess speed error (error code: 000032)
Cause:
- State in which driven at unexpected speed (fast) for control
Suspected cause:
- CR timing belt detached or broken
- CR motor failure
- Main Board Assy failure
Fix Epson WF-C579, WF-C529 error codes 000022, 000032?
– STEP 1: Check the CR timing belt
- Check that the timing belt is not detached or broken.
Is the result OK?- Yes? – Replace the following parts in sequence.
- CR motor
- Main Board Assy
(If the trouble is not resolved after replacing the parts as shown above, inquire at Epson Service Support department.)
- No?
- When detached Reattach the CR timing belt.
- When broken Replace the CR unit.
- Yes? – Replace the following parts in sequence.
Fix Epson WF-C579, WF-C529 error codes 100017, 100048, 100050, 100053… click here
Fix Epson WF-C579, WF-C529 fatal error codes 100065, 100070, 100066,… click here
WF-C579, WF-C529 CR fatal error 3
Error name:
- CR PID excess load error (error code: 000021)
- CR PID reverse error (error code: 000023)
- CR PID lock error (error code: 000024)
- CR PID under speed error (error code: 000025)
- CR load position excess load error (error code: 000031)
- CR load position reverse error (error code: 000033)
Cause:
- State in which load of CR motor exceeds expected load
- When rotated in the opposite direction to rotation direction
(There was a sudden load error, and the motor rotated in the opposite direction in reaction to it) - State in which load of motor exceeds expected load, and motor does not rotate at all
- When unexpected deceleration has been detected while controlling CR motor.
Suspected cause:
- Paper jam paper remaining
- CR lock lever failure (Inksystem Assy failure)
- CR main frame lubrication shortage/paper dust/mist
- PG error
- CR encoder failure
- CR motor failure
- Main Board Assy failure (Motor driver failure)
Fix Epson WF-C579, WF-C529 error codes 000021, 000023, 000024, 000025, 000031, 000033?
– STEP 1: Check for paper jam paper remaining and foreign object
- There is no paper jam paper and foreign object in the CR scanning section.
Is the result OK?- Yes? – Go to step 2
- No? – Remove the paper jam paper and foreign object.
– STEP 2: Check the CR lock lever operation
- Does the CR lock lever operate correctly when the power is on?
(Is the lowering operation performed correctly?)- Yes? – Go to step 3
- No? – Replace the Inksystem Assy
– STEP 3: Check the status of the CR main frame
- Did the following occur on the CR main frame?
- Is the CR main frame dirty from paper dust or mist?
- Is a lubrication shortage occurring?
Is the result OK?
Yes? – Go to step 4
No? – Clean the main frame and lubricate it.
– STEP 4: Check the PG
- s the PG value the standard value? Are the CR unit and platen in contact?
Is the result OK?- Yes? – Go to step 5
- No? – Adjust the PG.
– STEP 5: Check the CR operation
- Turn on the power and check the CR operation.
- • Is it not in runaway condition?
- • Is it operating?
Is the result OK?
Yes? – Go to step 6
No?
– When in run away condition Replace the CR encoder. (Replace the CR unit.)
– When not operating Replace the CR motor.
– STEP 6: Check the corresponding error
- Is the error continuing after checking step 1 to step 5?
- Yes? – Replace the Main Board Assy.
(If the trouble is not resolved after replacing the Main Board Assy, inquire at Epson Service Support department.) - No? – End.
- Yes? – Replace the Main Board Assy.
Fix Epson WF-C579, WF-C529 error codes 920403, 920518, 920623, 920903,… click here
Fix Epson WF-C579, WF-C529 error codes 920201, 920022, 920062, 920222,… click here