– To know more about Epson WF-C579, WF-C529 Operating Principles, click here
– To know more about Installation on Epson WF-C579, WF-C529, click here
Depending on the contract, ink information of this printer can be shown/hidden as necessary. In this setting, you can hide the Near Ink Cartridge Replacement message displayed on the operation screen when the remaining ink is running out.
Factory default setting is as follow: Ink Low show/hide setting: DISP (show)
How to hide Ink Low message?
STEP 1: Make sure the printer is turned off.
STEP 2: Press and hold [Power] while pressing [#].
STEP 3: Confirm the mode ID input screen is displayed.
Inquire of the Epson Service Department about the ID to enter the ink information switching mode.
STEP 4:
- Input the corresponding number in the Mode ID input screen.
- Use the [2][8] button for inputting. Pressing [6] moves the selection to the next digit.
- Press [#] when the entry is complete.
STEP 5: When the confirmation message is displayed, press the appropriate button below according to your desired operation.
- When entering the ink information switching mode => Press the execution button.
- When inputting the mode ID again => Press the input digit shift button.
In the ink information switching mode, operate with the buttons below.
– Center (screen center): operate
– Right (right area): move the selection (downward)
STEP 6: Select “2.INK Low Disp Change” from the menu of the ink information switching mode.
Options to choose on screen:
-
- INK Rest Disp Change: Remaining ink amount show/hide (does not indicate remaining ink).
(Normally not used. Used only on a special contract) - INK Low Disp Change: Ink Low show/hide (Does not show the Ink remaining warning)
- INK Rest Disp Change: Remaining ink amount show/hide (does not indicate remaining ink).
STEP 7: On the menu below, select the setting according to the contract.
- DISP; indicates Ink Low: => Press Left (left area).
- NON DISP; does not indicate Ink Low: => Press Right (right area).
- NoChange; exits without changing setting: => Press Power (Power button).
STEP 8:
- After changing the setting, the complete screen below is indicated.
- Confirm the setting is set to “Ink Low: NON DISP”, and turn the power off by pressing the Power button.
– Epson WF-C579, WF-C529 Inksystem mechanism, click here
– Epson WF-C579, WF-C529 Inksystem mechanism details, click here