– Epson WF-C579, WF-C529R Troubleshooting, click here
– To know more about Installation on Epson WF-C579, WF-C529, click here
WF-C579, WF-C529 IS fatal error 1
Error name:
- IS PID driving time error (error code: 000100)
- IS load position driving time error (error code: 000110)
Cause:
- The drive time of the motor exceeded the set time.
Suspected cause:
- FW abnormality
- Main Board Assy failure
Fix Epson WF-C579, WF-C529 error codes 000110, 000100?
– STEP 1: Check the reproducibility
- Did the corresponding error occur?
- Yes? – Go to step 2
- No? – Inquire at Epson Service Support department.
– STEP 2: Check the firmware version
- Is the firmware version latest?
- Yes? – Replace the Main Board Assy.
(If the trouble is not resolved after replacing the Main Board Assy, inquire at Epson Service Support department.) - No? – Update to the newest firmware.
- Yes? – Replace the Main Board Assy.
WF-C579, WF-C529 IS fatal error 2
Error name:
- IS PID excess speed error(error code: 000102)
- IS load position excess speed error (error code: 000112)
Cause:
- State in which driven at unexpected speed (fast) for control
Suspected cause:
- Dirt on the IS scale
- IS motor failure (Inksystem Assy failure)
- Main Board Assy failure (Motor driver failure)
Fix Epson WF-C579, WF-C529 error codes 000102, 000112?
– STEP 1: Check the IS scale state
- Any dirt on the IS scale?
- Yes?
– Replace the following parts in sequence.
• Inksystem Assy
• Main Board Assy
(If the trouble is not resolved after replacing the parts shown above, inquire at Epson Service Support department.) - No? – Clean the IS scale. (Wipe with a dustfree cloth.)
*If the cleaning is difficult, replace the Inksystem Assy
- Yes?
Fix Epson WF-C579, WF-C529 error codes 000060, 000072, 000064, 000073… click here
Fix Epson WF-C579, WF-C529 error codes 920403, 920518, 920623, 920903,… click here
WF-C579, WF-C529 IS fatal error 3
Error name:
- IS PID excess load error (error code: 000101)
- IS PID reverse error (error code: 000103)
- IS PID lock error (error code: 000104)
- IS load position excess load error (error code: 000111)
- IS load position reverse error (error code: 000113)
Cause:
- State in which load of IS motor exceeds expected load
- When rotated in the opposite direction to rotation direction
(There was a sudden load error, and the motor rotated in the opposite direction in reaction to it) - State in which load of motor exceeds expected load, and motor does not rotate at all
Suspected cause:
- Foreign object remaining
- Inksystem gear train part damaged
- IS encoder failure
- IS motor failure
- Main Board Assy failure
Fix Epson WF-C579, WF-C529 error codes 000101, 000103, 000104, 000111, 000113?
– STEP 1: Check the state of the Inksystem gear train parts
- Any dirt on the IS scale?
- Yes? – Go to step 2
- No?
– If any foreign object exists
Remove the foreign object or jammed paper.
– When damaged. Replace the Inksystem Assy.
– STEP 2: Perform IS motor operation check 1
- Turn on the power and check the IS motor operation.
Did the IS motor operate (rotate)?- Yes? – Go to step 2
- No? – Replace the Inksystem Assy.
– STEP 3: Perform IS motor operation check 2
- Is the IS motor operating normally?
- Yes? – Replace the Main Board Assy.
(If the trouble is not resolved after replacing the Main Board Assy, inquire at Epson Service Support department.) - No? – Replace the Inksystem Assy.
- Yes? – Replace the Main Board Assy.
Fix Epson WF-C579, WF-C529 error codes 920201, 920022, 920062, 920222,… click here
[…] Fix Epson WF-C579, WF-C529 error codes 000103, 000113, 000110, 000112… click here […]