Fix Epson WF-C579, WF-C529 error codes 000060, 000072, 000064, 000073…

– Epson WF-C579, WF-C529R Troubleshooting, click here

– To know more about Installation on Epson WF-C579, WF-C529, click here

WF-C579, WF-C529 ASF fatal error 1

Error name:

•  ASF PID driving time error (error code: 000060)
•  ASF load position driving time error (error code: 000070)

Cause:

• The drive time of the motor exceeded the set time.

Suspected cause:

• Main Board Assy failure

Fix Epson WF-C579, WF-C529 error codes 000060, 000070?

– STEP 1: Check the reproducibility

• Did the corresponding error occur?
  • Yes? – Replace the Main Board Assy
  • No? – Inquire at Epson Service Support department.

WF-C579, WF-C529 ASF fatal error 2

Error name:

•  ASF PID excess speed error (error code: 000062)
•  ASF load position excess speed error (error code: 000072)

Cause:

• State in which driven at unexpected speed (fast) for control.

Suspected cause:

•  ASF gear train part damaged
•  ASF motor failure
•  Main Board Assy failure (Motor driver failure)

Fix Epson WF-C579, WF-C529 error codes 000062, 000072?

– STEP 1: Check the ASF gear train parts

• Check that an ASF gear train part has not dropped off or become detached.
  Is the result OK?
  • Yes? – Replace the following parts in sequence.
    • ASF Motor Assy
    • Main Board Assy
    (If the trouble is not resolved after replacing the parts shown above, inquire at Epson Service Support department.)
  • No?
    –  When dropped off Reassemble the ASF gear train parts.
    –  When damaged Replace the ASF Motor Assy.

WF-C579, WF-C529 ASF fatal error 3

Error name:

•  ASF PID excess load error (error code: 000061)
•  ASF PID reverse error (error code: 000063)
•  ASF PID lock error (error code: 000064)
•  ASF load position excess load error (error code: 000071)
•  ASF load position reverse error (error code: 000073)

Cause:

•  State in which load of ASF motor exceeds expected load
•  When rotated in the opposite direction to rotation direction
  (There was a sudden load error, and the motor rotated in the opposite direction in reaction to it.)
•  State in which load of motor exceeds expected load, and motor does not rotate at all

Suspected cause:

•  Jammed paper or foreign object remaining
•  Paper path damaged and conveyance roller worn out
•  ASF gear train part damaged
•  ASF encoder failure
•  ASF motor failure
•  Main Board Assy failure

Fix Epson WF-C579, WF-C529 error codes 000064, 000061, 000063, 000071, 000073?

– STEP 1: Check the paper feed path state

• Check the paper feed path state as follows.
  • Is there any jammed paper or foreign object remaining in the paper feed path?
  Is the result OK?
  • Yes? – Go to step 2
  • No? – Remove the jammed paper and foreign object.

– STEP 2: Check the feed roller and the conveyance roller state

• Check that a feed roller and a conveyance roller are not damaged or worn out.
  Is the result OK?
  • Yes? – Go to step 3
  • No? – Replace the feed roller or replace the Rear Unit.

– STEP 3: Check the ASF motor operation_1

• Turn on the power and check the ASF motor operation.
  Did the ASF motor operate (rotate)?
  • Yes? – Go to step 4
  • No? – Go to step 5

– STEP 4: Check the ASF motor operation_2

• Is the ASF motor operating normally?
  • Yes? – Replace the Main Board Assy.
    (If the trouble is not resolved after replacing the Main Board Assy, inquire at Epson Service Support department.)
  • No? – Replace the ASF encoder.

– STEP 5: Check the ASF gear train parts

• Check if a foreign object impedes rotation or the ASF drive gears are damaged.
  Is the result OK?
  • Yes? – Replace the ASF Motor Assy.
    (If the trouble is not resolved after replacing the ASF motor assy, replace the Main Board Assy.)
  • No? – Remove the foreign object or replace the ASF Motor Assy.

 

Fix Epson WF-C579, WF-C529 error codes 920403, 920518, 920623, 920903,… click here

Fix Epson WF-C579, WF-C529 error codes 920201, 920022, 920062, 920222,… click here