Fix Epson WF-C579, WF-C529 error codes 000180, 000202, 000184, 000204…

– Epson WF-C579, WF-C529R Troubleshooting, click here

– To know more about Installation on Epson WF-C579, WF-C529, click here

WF-C579, WF-C529 additional LIFT fatal error 1

Error name:

• LFT2 PID driving time error (error code: 000180)
• LFT3 PID driving time error (error code: 000200)

Cause:

• The driving time of the motor exceeded the set time.

Suspected cause:

• Optional Paper Cassette Main Board Assy failure

Fix Epson WF-C579, WF-C529 error codes 000080, 000090, 000540, 000550?

– STEP 1: Check the reproducibility
Did the corresponding error occur?

• Yes? – Replace the Optional Paper Cassette Main Board Assy.
  (If the trouble is not resolved after replacing the Optional Paper Cassette Main Board Assy, inquire at Epson Service Support department.)
• No? – Inquire at Epson Service Support department.

WF-C579, WF-C529 additional LIFT fatal error 2

Error name:

• LFT2 PID excess speed error (error code: 000182)
• LFT3 PID excess speed error (error code: 000202)

Cause:

• State in which driven at unexpected speed (fast) for control

Suspected cause:

• Additional lift gear train detached or damaged
• Additional lift motor failure
• Optional Paper Cassette Main Board Assy failure

Fix Epson WF-C579, WF-C529 error codes 000080, 000090, 000540, 000550?

– STEP 1: Check the additional lift gear train parts
For additional lift gear train parts, check the following items.
• Has any additional lift gear train part dropped off or become detached?
• Are the additional lift gear train parts damaged?
Is the result OK?

• Yes? – Replace the Optional Paper Cassette Main Board Assy.
  (If the trouble is not resolved after replacing the Optional Paper Cassette Main Board Assy, inquire at Epson Service Support department.)
• No?
  – When dropped off or become detached
  Reassemble the additional lift gear train parts.
  – When damaged
  Replace the damaged part or the Optional Paper Cassette Unit.

Fix Epson WF-C579, WF-C529 error codes 000103, 000113, 000110, 000112… click here

Fix Epson WF-C579, WF-C529 error codes 000060, 000072, 000064, 000073… click here

WF-C579, WF-C529 additional LIFT fatal error 3

Error name:

• LFT2 PID excess load error (error code: 000181)
• LFT2 PID lock error (error code: 000184)
• LFT3 PID excess load error (error code: 000201)
• LFT3 PID lock error (error code: 000204)

Cause:

• The load became unexpectedly high with additional hopper lift driving.
• State in which load of motor exceeds expected load, and motor does not rotate at all

Suspected cause:

• Paper incorrectly loaded or number of sheets loaded exceeds maximum
• Foreign object in paper cassette
• Damage to or foreign object trapped in additional lift gear train parts
• Additional lift phase sensor failure
• Additional lift motor failure
• Optional Paper Cassette Main Board Assy failure

Fix Epson WF-C579, WF-C529 error codes 000080, 000090, 000540, 000550?

– STEP 1: Check the paper cassette_1
Check that there is no foreign object in the paper cassette.

• Yes? – Go to step 2
• No? – Remove the foreign object.

– STEP 2: Check the paper cassette_2
Check that more than the maximum number of sheets of paper is not loaded. Furthermore, is the paper loaded correctly?

• Yes? – Go to step 3
• No?
  –  When more than the maximum number of sheets of paper is loaded
  Reduce the number of sheets of paper loaded.
  –  When the paper is not loaded correctly
  Load it correctly.

– STEP 3: Check the paper cassette_3
For paper cassette, check the following items.
• Is the hopper mechanism operating correctly?
(Check if the hopper operate by rotating the drive gears of the left side of the paper cassette by hand.)
• Is driving gear damaged?
Is the result OK?

• Yes? – Go to step 4
• No?
  – When the hopper mechanism does not operate correctly
  Replace the paper cassette.
  – When the drive gears is damaged
  Replace the drive gears

– STEP 4: Perform the additional lift motor operation check_1
Turn on the power and check the additional lift motor operation.
Did the additional lift motor operate (rotate)?

• Yes? – Go to step 5
• No? – Go to step 6

– STEP 5: Perform the additional lift motor operation check 2
Check that the additional lift motor is not operating abnormally. (rotation does not stop)
Is the result OK?

• Yes? – Replace the Optional Paper Cassette Main Board Assy.
  (If the trouble is not resolved after replacing the Optional Paper Cassette Main Board Assy, inquire at Epson Service Support. department.)
• No? – Replace the additional lift phase sensor

– STEP 6: Check the additional lift gear train parts
Check that there is no foreign object in the paper cassette.

• Yes? – Inquire at Epson Service Support department.
• No?
  – If any foreign object exists
  Remove the foreign object.
  – When damaged Inquire at Epson Service
  Support department.

Fix Epson WF-C579, WF-C529 error codes 920403, 920518, 920623, 920903,… click here

Fix Epson WF-C579, WF-C529 error codes 920201, 920022, 920062, 920222,… click here