– To know more about Epson WF-C579, WF-C529 Operating Principles, click here
– To know more about Installation on Epson WF-C579, WF-C529, click here
Epson WF-C579/WF-529 Paper jam error
– Occurs if a paper jam has occurred in the printer mechanism.
– List of error code and sub error code following:
- the starting error code 920000
- There are about more than 200 error code following Paper jam error code: 920xxx from 920001…920215
- error case about Paper jams almost concern about the attach paper, some error Sensors or the movement of Motors on printer products
- Contact us to get detail documents to fix the printer error
– Occurrence factor make case errors:
- error occurs when the paper does not reach the sensors
- error occurs when some Sensors do not detect the paper edge
- error occurs when the feed sensor of option cassette does not detect the paper
- error occurs when detecting the speed down of some Motors movement
- error occurs when detecting the excess load of any Motors movement
- …
– Solution to fix the Epson WF-579/WF-529 Paper jam error code 920000,…?
- Contact us to get the document about fixxing case
Fix Epson WF-579R, 579Ra, 529R error code 920001?
- Error message: CR protective material removal forgotten error
- Occurs if mechanism initialization was not performed normally because removal of the CR protective material or protective tape had been forgotten when the power was first turned on.
- Solution: Remove the CR protective material and protective tape.
Epson WF-C579/WF-529 fix error code 920245
Error name: Double feeding error
Error details: Occurs if multiple sheets are fed at the same time when manual duplex printing.
Fix error code 920245?: Reload the paper and then try again
Fix Automatic duplex paper size mismatch error
Epson WF-579/529 Error code: 920261, 920262, 920263, 920265
Error details: Occurs if the length of the paper loaded when automatic duplex printing differs from that of the setting
Fix error code 920261, 920262, 920263, 920265?: Match the main unit setting and actual paper size.
Fix error code 920281, 920282, 920283, 920285
Error name: Fax paper length mismatch error
Error details: Occurs if the paper size when fax printing is determined to not match.
Fix error code 920281, 920282, 920283, 920285?: Match the main unit setting and actual paper size.
Paper size/type mismatch error
Error code: 920302, 920305, 920321, 920322, 920323 ,920325
Error details: Occurs if paper corresponding to the paper size setting of the driver, etc. is not set on the main unit.
Fix error code Paper size/type mismatch error?: Match the paper size setting of the driver, etc. and the actual paper size.
Duplex printing not possible error
Error code: 920381, 920382, 920383, 920385
Error details: Occurs if a paper size or paper type mismatch occurs and the duplex reverse process is determined to be physically impossible.
Fix error code Duplex printing not possible error?: Match the main unit setting / print settings and actual paper size.
Feed roller end of life reached error
Error code: 920421, 920422, 920423, 920425
Error details: Occurs when printing ends or the power turns on if the print count of the corresponding cassette has reached the number of pages for its life
Fix error code Feed roller end of life reached error?:
- Temporarily turn the error display off (if will continue use without replacing the part).
- Press the [OK] button in the Error screen. (The error will be displayed later every 300 sheets or when the power is turned on.)
- Replace the part and reset the internal counter.
Feed roller end of life approaching warning
Error code: 92100, 921002, 921003, 921005
Error details: Displayed when the Feed Roller has reached 97% of its service life.
Fix error code Feed roller end of life approaching warning?:
- Press the [OK] button in the Error screen.
(The error will be displayed later every 300 sheets or when the power is turned on until the end of life of the part is reached.)
Feed roller end of life reached warning
Error code: 921021, 921022, 921023, 921025
Error details: Occurs when printing ends or the power turns on if the print count of the corresponding cassette has reached the number of pages for its life.
Fix error code Feed roller end of life reached warning?:
- Temporarily turn the error display off (if will continue use without replacing the part).
- Press the [OK] button in the Error screen. (The error will be displayed later every 300 sheets or when the power is turned on.)
- Replace the part and reset the internal counter.
– Setting the DNS server on Epson WF-C579, WF-C529, click here
– Connect Wi-Fi for Epson WF-C579, WF-C529, click here